|
Store Front |
|
Publications & Manuals |
|
Mics, Headsets & Other Accessories |
|
Antennas & Cables |
|
Antenna Couplers, QMS Systems & Accessories |
|
Amplifiers, Power Supplies & Accessories |
|
ADSP2 Noise Cancellation |
|
Handset: Military Dynamic $220.00 Catalog #52-30 This is a military type telephone handset. Fully waterproof, dustproof and immersible, this handset is recommended for all applications where radios will be subjected to harsh and/or tactical environments. Please specify which radio will be used at time of order. 
[ Add to Cart] [ View Cart] |
|
MICROPHONE: FIST, DYNAMIC (4 pins connector) $70.00 Catalog #52-25 This is a fist type microphone equipped with a dynamic element. Designed for use under typical HF installation conditions, this microphone is durable and has good frequency response. This microphone was supplied standard with SG-2000 radios. Please specify which SGC radio will be used at time of order. 
 
|
|
MICROPHONE: FIST, DYNAMIC (8 pins connector) $70.00 Catalog #52-26 This is a fist type microphone equipped with a dynamic element. Designed for use under typical HF installation conditions, this microphone is durable and has good frequency response. This microphone is supplied standard with SG-2000 radios. Please specify which SGC radio will be used at time of order.
|
|
MICROPHONE: DESK, DYNAMIC $170.00 Catalog #52-22 This is a dynamic element desk microphone designed to use where operating conditions are moderate. The unit provides both momentary contact and locking push-to-talk switching. Finished in attractive matte black, this microphone is supplied with an 18" cable. Please specify which SGC radio will be used at time of order.
|
|
REMOTE KIT FOR SG-2000 PowerTalk ADSP2 (Swivel bracket mount) $300.00 Catalog #04-24 Remote Kit is designed for fitting exclusively with SG-2000 PowerTalk ADSP2 remote head. Remote Kit includes back cover plate for the control head, external 5 Watt speaker with 8 feet speaker cord, swivel bracket mounts and 20 feet of remote cable. *IMPORTANT NOTE: Factory installation is recommended for retrofit of this kit.
|
|
Additional PowerTalk ADSP2 Remote Head $995.00 Catalog #04-42 PowerTalk Remote head is designed for use with the SG-2000 HF SSB radio. Head controls following functions: Head supplied with SGC ADSP2 Adaptive Digital Signal Processing Signal noise processing Noise reduction and limiting Spectral noise suppression Bandpass filtering Automatic Alarm Generator Volume control - a rotary type knob is provided Squelch circuit - a squelch function provides silence during inactivity Radio interface - SG-2000 serial bus Display - Two bar graphs with 30 red and greed LEDs Audio - 5 Watts at less than 10% THD External speaker - 5 watt Microphone: Selectable, Hi Z dynamic or carbon Squelch - Level detection, selectable detect level Maximum number of heads - up to 4 control heads can be used Operating temperature: -10C to + 80C (non condensing) Reduced rating temperature: -30C to +85C (non condensing) Storage temperature: -40C to +95C (non condensing) Maximum altitude - 15,000 ft (4615 meters) Physical Size - 7.8 in W x 2.6 in H x 9.5 in L (19.8 x 6.6 x 24.1 cm) Weight - 2.5 lbs Supplied with 20 ft cable and mounting bracket
|
|
SG-2020 Mobile, Base and Pedestal Mount Plate $19.95 Catalog #05-42 Mount plate is to be attached at the lower part of the radio to secure as a base, mobile or pedestal mount for both base and mobile installation. Includes four adhesive rubber feet and two, 5 inch Velcro strips for alternate use. Pedestal hardware is not supplied.
|
SG-2000 PowerTalk DSP Synth Radio, 150 Watts 1.6-30 MHz with ADSP2 Remote Head kit installed$2,195.00 Catalog #04-43 Model: SG-2000 PowerTalk, featuring ADSP2 (Automatic Digital Signal Processing)with Remote Head. ADSP technology greatly increases signal clarity and reduces noise. Head supplied with SGC ADSP2 Adaptive Digital Signal Processing Multiple tone suppression Signal noise processing Noise reduction and limiting Bandpass filtering Automatic Alarm Generator Volume control - a rotary type knob is provided Radio interface - SG-2000 serial bus Channels: User programmable: 100 channels Channels: Factory programmed: 644 ITU voice & data Scan channels: up to 100 channels Frequency Range TX: 1.6 to 30 MHz, RX: .5 to 30 MHz Power output: 150 watts PEP Frequency Stability: ±10 Hz Operating Modes: A3A, A3H, A3J and CW in LSB and USB Display: LCD for frequency or channel with annunciators Metering: S-meter, forward or reflected power Keypad: 28 keys, 2 pots, & 1 rotary knob A high performance spinner and VFO knob allows hands on tuning and split frequencies For operation: 12 VDC Squelch circuit - a squelch function provides silence during inactivity Squelch: Voice operated with syllabic detection Speaker: Internal, 16 ohm RF Input/Output: 50ohms RTTY, ARQ, FEC, PACKET: Ready and compatible (Modem optional) AFSK Input/Output impedance: 600ohms Computer Input/Output: RS-232 (optional) Intercom: Between all control heads Full remote control, up to 4 stations Head can be remoted with remote kit option Microphone: Dynamic Clock: Time of day or date Timer: Radio on/off Approvals: FCC type approval, parts 80, 87 and 90. DOC and CEPT(pending). Meets CCIR specifications
|
SG-2000 PowerTalk DSP Synth Radio, 150 Watts 1.6-30 MHz with ADSP2$1,895.00 Catalog #04-40 Model: SG-2000 PowerTalk, featuring ADSP2 (Automatic Digital Signal Processing). ADSP2 technology greatly increases signal clarity and reduces noise. Head supplied with SGC ADSP2 Adaptive Digital Signal Processing Multiple tone suppression Signal noise processing Noise reduction and limiting Bandpass filtering Automatic Alarm Generator Volume control - a rotary type knob is provided Radio interface - SG-2000 serial bus Channels: User programmable: 100 channels Channels: Factory programmed: 644 ITU voice & data Scan channels: up to 100 channels Frequency Range TX: 1.6 to 30 MHz, RX: .5 to 30 MHz Power output: 150 watts PEP Frequency Stability: ±10 Hz Operating Modes: A3A, A3H, A3J and CW in LSB and USB Display: LCD for frequency or channel with annunciators Metering: S-meter, forward or reflected power Keypad: 28 keys, 2 pots, & 1 rotary knob A high performance spinner and VFO knob allows hands on tuning and split frequencies For operation: 12 VDC Squelch circuit - a squelch function provides silence during inactivity Squelch: Voice operated with syllabic detection Speaker: Internal, 16 ohm RF Input/Output: 50ohms RTTY, ARQ, FEC, PACKET: Ready and compatible (Modem optional) AFSK Input/Output impedance: 600ohms Computer Input/Output: RS-232 (optional) Intercom: Between all control heads Full remote control, up to 4 stations Head can be remoted with remote kit option Microphone: Dynamic Clock: Time of day or date Timer: Radio on/off Approvals: FCC type approval, parts 80, 87 and 90. DOC and CEPT(pending). Meets CCIR specifications 
|
SG-2020 Front Flip-foot stand$2.95 Catalog #05-43 Flip-foot stand to elevate radio 2 inches. For desk or bench operation.
|
|
CABLE:CA-2000, for SG-2000 remote head control, Custom Lengths (per foot) $3.00 Catalog #52-54 Cable consists of 5 individual 22 gauge wires, red, black, orange, yellow and blue respectively, to control or supply 13.6 VDC, ground, PTT, oven light, on/off switch. In addition, two shielded pairs of 22 gauge wire are supplied, one for Data Communication Control information and the second for Audio in and out. A separate ground drain wire is supplied for each pair. One main ground wire of 20 gauge is also supplied and connected to the braid shield of the cable. The cable is black in a PVC jacket, resistant to ultra violet. Outside diameter is .3 inch.
|
|
Upgrade Powertalk Head to ADSP2 $250.00 Add SGC's ADSP2 Adaptive Digital Signal Processing Signal noise processing Noise reduction and limiting Spectral noise suppression Bandpass filtering Automatic Alarm Generator
|
|
SG-2020 ADSP2 Retrofit $250.00 Catalog 70-11 Automatic Digital Signal Processing and Spectral Noise Subtraction - same as ADSP in SG-2020 ADSP2 (catalog 05-04) - 13 & 26 dB switch selectable noise reduction - 6.5 to 13 ms delay time - 50 to 65 dB tone rejection - three switch selectable DSP bandpass filters 100, 500, 1800 Hz - filter out of band rejection -45 dB Done at the factory only Contact SGC for shipping instructions and RMA number when ordering
|